Model: MAC4
Category: 3-in-1 Machine
Brand: RuiHui
Material width(mm): 70-1300
Material Thickness(mm): 0.6-6.0
Speed(m/min): 16-24
Supply Ability: 20 set / Month In Stock!
Payment Terms: T/T
It is especially suitable to match with an S-type leveler, gear feeder, and high-speed punching machine to form a high-speed synchronous stamping line for the motor stator and EI piece.
3-in-1 Uncoiler straigtener feeder adopts a computer NC control system with a more user-friendly design. It is suitable for feeding and straightening various metal sheets; this type of machine is mainly used for straightening materials with a thickness of 0.6~6.0mm, and the stick system generally adopts 7 The maximum width of the corresponding material is 2000mm. It is suitable for continuous stamping processing of various hardware, electronics, electrical appliances, molds, and auto parts, feeding correction, accuracy, and durability; In the die, there is no need for manual feeding, saving labor, and high safety.
The customization of this model is more flexible. If the width of the coil is narrow, double-limit rollers can be customized.
1. 3-in-1 thick plate decoiler straightener feeder machine is specially designed with a back pressure roller set, which is suitable for punching, uncoiling, and leveling feeding of coils with a thickness of 0.6mm to 6.0mm and a width of 70mm to 1300mm.
2. The material frame tile plate adopts a four-blade design, the blade radian is consistent with the inner diameter of the material, the blade surface is hard-plated, smooth, and wear-resistant, and will not damage the material during use, the inner diameter expansion adopts rotary oil cylinder, hydraulic expansion, The material reel adopts a wedge-shaped slider structure, and at the same time adopts a drum brake, which can effectively prevent the material from being scattered due to the rotational inertia during braking.
3. The discharge width is adjusted by the two stopper rollers with screws. When discharging, the outer stopper roller is lifted by the cylinder to avoid the material, and the material can be loaded and unloaded easily.
4. The straightening roller is made of high-alloy bearing steel, and undergoes a series of heat treatments (quenching and tempering + high-frequency treatment + hard chrome layer) to strictly ensure the rigidity of the straightening roller and the surface finish of the straightening roller, and ensure the correctness of the straightened material during the straightening process. Surface performance, the surface hardness of the straightening roller is as high as HRC60, ensuring high precision and high wear resistance.
5. The feeding port of the leveling feeder head adopts the structure of two-bar pinch feeding and pressing. The motor drives the upper and lower pinch rollers to work through the reducer and sends the material head to the leveling host.
6. Four worm gears and worms are used for adjustment, which drives the upper slider to move up and down, to realize the adjustment of the pressing amount. An adjustment dial is attached to the adjustment handwheel to accurately display the adjustment amount.
7. The feeding outlet is equipped with a supporting material guide rail device so that the leveled material can enter the mold stably and straightly for work. (This unit is removable)
8. The lift of the fuselage adopts a four-worm electric drive to lift and lower, and the height of the feeding line can be easily adjusted.
| Model | MAC4-400 | MAC4-600 | MAC4-800 | MAC4-1000 | MAC4-130 |
| Stock Width(mm) | 70~400 | 70~600 | 70~800 | 70~1000 | 70~1300 |
| Stock Thickness(mm) | 0.6~6.0 | 0.6~6.0 | 0.6~6.0 | 0.6~6.0 | 0.6~6.0 |
| Max.Coil Weight(kg) | 5000 | 5000 | 7000 | 7000 | 7000 |
| Max.Coil O.D.(mm) | 1400 | 1400 | 1400 | 1400 | 1400 |
| Coil I.D.(mm) | 508 | 508 | 508 | 508 | 508 |
| Feed Length(mm) | 500 | 500 | 500 | 500 | 500 |
| Max.Line Speed(m/min) | 16~24 | 16~24 | 16~24 | 16~24 | 16~24 |
| Work Roll Number | upper4/lower3 | upper4/lower3 | upper4/lower3 | upper4/lower3 | upper4/lower3 |
| Feed Roll number | 1 | 1 | 1 | 1 | 1 |
| Main Motor(kw) | AC5.5 | AC7.5 | AC7.5 | AC11.0 | AC11.0 |
| Mandrel Expansion | hydraulic | hydraulic | hydraulic | hydraulic | hydraulic |
| Reel Mot or(kw) | 2.2 | 2.2 | 3.7 | 3.7 | 3.7 |
| Power (V) | 3Phase 220V/380V/50HZ | ||||
| Operating Air(Mpa) | 0.49 | 0.49 | 0.49 | 0.49 | 0.49 |
1. Strong water resit bottom in plywood.
2. Corner protect by foam and fixed by a protective film.
3. All covered by a strong and hard protective film.
4. Inside steel frame protector.
5. Plywood packing and steel strip outside fixed the box.
6. Finishing packing by normal container or frame container.
1. Equipment model selection, provide the technical parameters of the relevant equipment.
2. Progressing Solution Design: According to the customer’s product processing requirement, we can design a unique solution that supports higher manufacturing efficiency and better processing quality for the customer.
3. Customized Machine Design: According to the customer’s application, we may revise our machine according to the customer’s convenience and high production efficiency.
1. As a professional Automation machine manufacturer and supplier, RUIHUI will supply the all machine with training video and user’s manual in English for installation, operation, maintenance, and trouble-shooting, and shall give technical guides by remote, such as TeamViewer, E-mail, Telephone, Mobile, Whatsapp, Skype, 24/7 online chat, and so on, when you meet some problems of installation, operation or adjusting.
2. You can come to our factory for training. We will offer professional guidance and direct and effective face-to-face training. Here we have assembled equipment, all sorts of tools, and a testing facility. Training Time: 3~5 days.
3. Our engineer will do a door-to-door instruction training service at your local site. We need your help to deal with the visa formality, prepaid traveling expenses, and accommodation to us during the business trip and service period before their dispatch.
As a top Automation Machine brand in the world, RUIHUI promise:
1. 1 year for the whole Ruihui machine free warranty.
2. Long life-time maintenance, the after-sale department will offer 24/7 English online support.
3. We provide machine-related parts service
4. After the warranty period expired, the Ruihui buyer only needs to pay the actual maintenance cost.
5. Certificate support:
All the machines can be shipped worldwide by sea, air, or express logistics via DHL, FedEx, and UPS. You are welcome to get a free quotation by filling up the form with your name, email, detailed address, product, and requirements, we will shortly contact you with the full information including the most suitable delivery method (fast, secure, discreet) and freight.
MAC1 Uncoiler Straightener Feeder Machine For Thin Plate Model: MAC1 Category: 3-in-1 Machine Brand: RuiHui Material width(mm): 50-400 Material Thickness(mm): 0.2-3.0 Speed(m/min): 16-24 Supply Ability: 20 set
MAC2 Decoiler Straightener Feeder Machine 3-in-1 Model: MAC2 Category: 3-in-1 Machine Brand: RuiHui Material width(mm): 50-800 Material Thickness(mm): 0.3-3.2 Speed(m/min): 16-24 Supply Ability: 20 set / Month
MAC3 Uncoiler Straightener Feeder Machine 3-in-1 Model: MAC3 Category: 3-in-1 Machine Brand: RuiHui Material width(mm): 50-1000 Material Thickness(mm): 0.3-4.5 Speed(m/min): 16-24 Supply Ability: 20 set / Month In
MAC4-F Decoiler Straightener Feeder 3-in-1 Machine Model: MAC4-F Category: 3-in-1 Machine Brand: RuiHui Material width(mm): 70-1600 Material Thickness(mm): 0.6-6.0 Speed(m/min): 16-24 Supply Ability: 20 set / Month
