Model: MAC2
Category: 3-in-1 Machine
Brand: RuiHui
Material width(mm): 50-800
Material Thickness(mm): 0.3-3.2
Speed(m/min): 16-24
Supply Ability: 20 set / Month In Stock!
Payment Terms: T/T
It is especially suitable to match with an S-type leveler, gear feeder, and high-speed punching machine to form a high-speed synchronous stamping line for the motor stator and EI piece.
MAC2 3-in-1 decoiler Straightener feeder adopts the lower feeding method, which is suitable for punching, uncoiling, and leveling feeding of medium and thin sheet coils with a thickness of 0.3 to 3.2mm width of 50mm to 800mm. The realization of super flatness The adoption of 11 working rollers (upper 6/lower 5) realizes the highest level of flatness in the field of medium and thin plates and medium and thick plates. It can serve precision high-speed punch presses with increased demand.
For models over 500mm in this series, a feeding arm and an inlet pressing device will be added to assist feeding; the direct-drive variable frequency control gear motor makes it easier to change the correction speed to match the production line speed. In addition, the adoption of high-precision gears without chain and direct drive enables the working rollers to run smoothly even when the dynamics reach the limit. Provide a guarantee for users to produce high-precision products.
This series of 3-in-1 machines is generally used in the home appliance industry, and the maximum width is currently 800mm; according to the thickness of the material, this model is generally equipped with punches below 200T.
1. Integration of material rack, Straightener, and feeder: strong complete set, reasonable and compact combination, which can save space and space to the greatest extent.
2. High-precision design ensures zero wear of the material: the four-blade design of the material rack part, the blade radian is consistent with the inner diameter of the material, the blade surface is hard-plated, smooth, and wear-resistant, the blade width ≥ 200mm, thickness ≥ 18mm; damage the material.
3. Perfect lubrication system: The leveling and feeding are equipped with butter pumps, which can refuel the gears regularly, and there are refueling points on the components that move frequently to ensure stable lubrication of the equipment.
4. There are 11 leveling rollers, and high-strength rolling bearing steel GCr15 is used. After quenching and tempering treatment, high-frequency quenching, the surface hardness can reach HRC60-62 degrees after hard chrome plating, and the dimensional accuracy is 0.01mm. The rigidity and surface finish of the leveling rollers ensure the surface properties of the material being leveled during the leveling process.
5. The material on the rack is controlled by the contrast photoelectric below. The leveling feeder head can be leveled while sending the material with the preset feeding length to the punching die. Instantly relax the material action, press down forcefully, and guide the material accurately.
6. The operation of each auxiliary device is powered by air or electricity, which is simple to operate and easy to maintain. After debugging, the failure rate is low.
7. Reliable quality and stable performance: Ruihui Intelligent has many years of experience in the production of feeder equipment, light, flexible and reasonable frame design, and strict factory debugging, so as to ensure that each three-in-one feeder runs smoothly and has reliable performance.
| Model | MAC2-400 | MAC2-600 | MAC2-800 | ||
| Stock Width(mm) | 50~400 | 50~600 | 50~800 | ||
| Stock Thickness(mm) | 0.3~3.2 | 0.3~3.2 | 0.3~3.2 | ||
| Max.Coil Weight(kg) | 3000 | 3000 | 5000 | 5000 | 7000 |
| Max.Coil O.D.(mm) | 1200 | 1200 | 1200 | ||
| Coil I.D.(mm) | 508 | 508 | 508 | ||
| Feed Length(mm) | 500 | 500 | 500 | ||
| Max.Line Speed(m/min) | 16~24 | 16~24 | 16~24 | ||
| Work Roll Number | upper6/lower5 | upper6/lower5 | upper6/lower5 | ||
| Feed Roll number | 1 | 1 | 1 | ||
| Main Motor(kw) | AC2.9 | AC4.4 | AC4.4 | ||
| Mandrel Expansion | hydraulic | hydraulic | hydraulic | ||
| Reel Mot or(kw) | 1.5 | 1.5 | 2.2 | 2.2 | 3.7 |
| Power (V) | 3Phase 220V/380V/50HZ | ||||
| Operating Air(Mpa) | 0.49 | 0.49 | 0.49 | ||
1. Strong water resit bottom in plywood.
2. Corner protect by foam and fixed by a protective film.
3. All covered by a strong and hard protective film.
4. Inside steel frame protector.
5. Plywood packing and steel strip outside fixed the box.
6. Finishing packing by normal container or frame container.
1. Equipment model selection, provide the technical parameters of the relevant equipment.
2. Progressing Solution Design: According to the customer’s product processing requirement, we can design a unique solution that supports higher manufacturing efficiency and better processing quality for the customer.
3. Customized Machine Design: According to the customer’s application, we may revise our machine according to the customer’s convenience and high production efficiency.
1. As a professional Automation machine manufacturer and supplier, RUIHUI will supply the all machine with training video and user’s manual in English for installation, operation, maintenance, and trouble-shooting, and shall give technical guides by remote, such as TeamViewer, E-mail, Telephone, Mobile, Whatsapp, Skype, 24/7 online chat, and so on, when you meet some problems of installation, operation or adjusting.
2. You can come to our factory for training. We will offer professional guidance and direct and effective face-to-face training. Here we have assembled equipment, all sorts of tools, and a testing facility. Training Time: 3~5 days.
3. Our engineer will do a door-to-door instruction training service at your local site. We need your help to deal with the visa formality, prepaid traveling expenses, and accommodation to us during the business trip and service period before their dispatch.
As a top Automation Machine brand in the world, RUIHUI promise:
1. 1 year for the whole Ruihui machine free warranty.
2. Long life-time maintenance, the after-sale department will offer 24/7 English online support.
3. We provide machine-related parts service
4. After the warranty period expired, the Ruihui buyer only needs to pay the actual maintenance cost.
5. Certificate support:
All the machines can be shipped worldwide by sea, air, or express logistics via DHL, FedEx, and UPS. You are welcome to get a free quotation by filling up the form with your name, email, detailed address, product, and requirements, we will shortly contact you with the full information including the most suitable delivery method (fast, secure, discreet) and freight.
MAC1 Uncoiler Straightener Feeder Machine For Thin Plate Model: MAC1 Category: 3-in-1 Machine Brand: RuiHui Material width(mm): 50-400 Material Thickness(mm): 0.2-3.0 Speed(m/min): 16-24 Supply Ability: 20 set
MAC3 Uncoiler Straightener Feeder Machine 3-in-1 Model: MAC3 Category: 3-in-1 Machine Brand: RuiHui Material width(mm): 50-1000 Material Thickness(mm): 0.3-4.5 Speed(m/min): 16-24 Supply Ability: 20 set / Month In
MAC4 Uncoiler Straightener Feeder 3-in-1 Machine Model: MAC4 Category: 3-in-1 Machine Brand: RuiHui Material width(mm): 70-1300 Material Thickness(mm): 0.6-6.0 Speed(m/min): 16-24 Supply Ability: 20 set /
MAC4-F Decoiler Straightener Feeder 3-in-1 Machine Model: MAC4-F Category: 3-in-1 Machine Brand: RuiHui Material width(mm): 70-1600 Material Thickness(mm): 0.6-6.0 Speed(m/min): 16-24 Supply Ability: 20 set / Month
