RNC-F Servo Roll Feeder Machine​

Model: RNC-F

Category: Feeder

Brand: RuiHui

Material width(mm): 200-500

Material Thickness(mm): 0.2-3.2

Speed(m/min): 16

Supply Ability: 20 set / Month In Stock!

Payment Terms: T/T

Decoiler machine Applications

It is especially suitable to match with an S-type leveler, gear feeder, and high-speed punching machine to form a high-speed synchronous stamping line for the motor stator and EI piece.

Product Introduction

The release method of the RNC-F servo roll feeder is pneumatic release. The mechanical structure and control system are integrated. Through CCS (computer-controlled servo system), various numerical controls that were impossible in the past have been realized with high precision. Quick and accurate operation is simple.

Due to the mechanical structure of this model, the control system motors are all 0.75KW, so according to the power principle of the work, this model can only achieve a maximum of 400mm. At present, the test speed of this equipment can reach 300SPM at the fastest, and the test step distance is 10mm.

The servo control system of the RNC-F model adopts the Japanese Yaskawa brand, and the touch screen adopts the Taiwan Weilun brand. If the customer needs to change other brands, please confirm with the project and then customize.

Features and Advantages

1. Productivity: The high-speed roller feeder is currently widely used in the stamping industry. It is easy to operate and can process multiple projects continuously.

2. High speed: The number of revolutions is proportional to the feeding length, up to 200 times per minute.

3. Strong compatibility: no matter the width and thickness of the material, just adjust the feeder to match the mold, which is economical and practical.

4. Energy saving: no electricity or gas source is required, it is connected to the output shaft of the punch, and is driven by the punch to save energy. Low failure rate and easy maintenance.

5. High precision: the feeding accuracy is ±0.2mm. If the guide pin is positioned, the accuracy of ±0.1mm can be obtained.

6. Safety: Adjust the telescopic adjustable pull rod to the standard length, and match the rocker arm with the standard transmission angle, which is safe and easy to use.

7. Environmental protection: The machine is quiet when running, and does not cause noise in the workplace.

Technical Parameters

ModelRNC-200FRNC-300FRNC-500F
Width of Material (mm)200300500
Thickness of Material (mm)0.2~3.2
Feeding Capactiy
(Witdh×Thickness)

200w×2.3t

100w×3.2t

300w×2.3t

80w×3.2t

500×1.6    300w×2.3t

60W×3.2T

Max.Feed Length(mm)9999.99
Feed Pitch Accuracy(mm)±0.2MM
Roll PressureSpring Type
Speed(M/Min)16
Releasing SystemPneumatic Type
Pass Line Adjust80-150mm
Power SupplyAC220/1PHASE
Releasing Performance(SPM)150120
Motor(kw)AC0.75

Applications

High Precision Electronic Parts

Household Appliances

Automobile Industry

Aerospace industry

Package

1. Strong water resit bottom in plywood.

2. Corner protect by foam and fixed by a protective film.

3. All covered by a strong and hard protective film.

4. Inside steel frame protector.

5. Plywood packing and steel strip outside fixed the box.

6. Finishing packing by normal container or frame container.

Pre-Sale Service for Automation Machine from RUIHUI

1. Equipment model selection, provide the technical parameters of the relevant equipment.

2. Progressing Solution Design: According to the customer’s product processing requirement, we can design a unique solution that supports higher manufacturing efficiency and better processing quality for the customer.

3. Customized Machine Design: According to the customer’s application, we may revise our machine according to the customer’s convenience and high production efficiency.

After-Sale Service for Automation Machine from RUIHUI

1. As a professional Automation machine manufacturer and supplier, RUIHUI will supply the all machine with training video and user’s manual in English for installation, operation, maintenance, and trouble-shooting, and shall give technical guides by remote, such as TeamViewer, E-mail, Telephone, Mobile, Whatsapp, Skype, 24/7 online chat, and so on, when you meet some problems of installation, operation or adjusting.

2. You can come to our factory for training. We will offer professional guidance and direct and effective face-to-face training. Here we have assembled equipment, all sorts of tools, and a testing facility. Training Time: 3~5 days.

3. Our engineer will do a door-to-door instruction training service at your local site. We need your help to deal with the visa formality, prepaid traveling expenses, and accommodation to us during the business trip and service period before their dispatch.

RUIHUI Automation Machine Warranty

As a top Automation Machine brand in the world, RUIHUI promise:

1. 1 year for the whole Ruihui machine free warranty.

2. Long life-time maintenance, the after-sale department will offer 24/7 English online support.

3. We provide machine-related parts service

4. After the warranty period expired, the Ruihui buyer only needs to pay the actual maintenance cost.

5. Certificate support:

Shipping to Around the World

All the machines can be shipped worldwide by sea, air, or express logistics via DHL, FedEx, and UPS. You are welcome to get a free quotation by filling up the form with your name, email, detailed address, product, and requirements, we will shortly contact you with the full information including the most suitable delivery method (fast, secure, discreet) and freight.

Contact Us

RNC feeder machine

ruihui2000@ruihui.cn

+86-0769-89296726

Contact Us

GUANGDONG RUIHUI INTELLIGENT TECHNOLOGY CO., LTD.
Phone: +86-0769-89296726
Email: ruihui2000@ruihui.cn
No.30, South Outer Ring Road, Xiegang Town, Dongguan, P.R.China
MON-FRI 09:00 - 19:00, SAT-SUN 10:00 - 14:00

Related