Model: ME
Category: Decoiler
Brand: RuiHui
Material Width(mm): 20-800
Material Thickness(mm): 0.2-3.0
Material O.D: Φ930-Φ1200
Supply Ability: 20 set / Month In Stock!
Payment Terms: T/T
It is especially suitable to match with an S-type leveler, gear feeder, and high-speed punching machine to form a high-speed synchronous stamping line for the motor stator and EI piece.
Heavy-duty material rack is the special equipment for metal coil uncoiler, mainly used for stamping industry automatic load metal coil, also can be used for metal coil slitting line, plant metal tile forming a line and other different industries metal coil load. Heavy-duty uncoiler commonly used standard heavy-duty uncoiler and hydraulic heavy-duty decoiler two, which can be applied to material weight 0-20T of a variety of plate material volume use, suitable for a variety of coil material collection and placement, thin plate metal and non-metallic materials can be. The use of punching machines, save workforce, and material resources, and reduce costs, the effect is particularly good.
The heavy material frame is welded by steel plate, useful for long-distance bearing support point, there is no force and power, bearing coil material is supported by four sides of the tile plate, usually through the hand crank type up tight coil material, for the coil material heavier also with oil pressure expansion, and in order to facilitate the loading of the coil material, but also with oil pressure loading cart, electric control part of most of the machine are not added frequency converter speed adjustment, only for the material frame heavier only Only for the heavier material frame can the frequency converter be added to adjust.
There are manual type, pneumatic type, and hydraulic types of mandrel expansion and contraction respectively, and you can choose the required model according to the width and weight of the coil. Generally when the material thickness is close to 2.0mm, consider the need to increase the press arm device, because at this time the material tension material weight exceeds 2T, consider increasing the hydraulic expansion.
Our heavy-duty uncoilers are equipped with a compression arm to keep the coils tight during the uncoiling process. The support arm can also be used for thick materials. In addition, the uncoiler has a wire break system to avoid loosening of the coils. For this purpose, we have also added circuit control devices placed under the coils.
1. The fuselage box of the heavy-duty material frame is welded with steel plates. After welding, it is annealed and polished. It has strong rigidity and a good appearance, Stabilize.
2. The motor is controlled by the reducer, and the belt drive is used, which has good function, high reliability, and few failures.
3. The supporting tile adopts a four-blade design, the radian of the tile is consistent with the inner diameter of the material, the surface of the tile is smooth and wear-resistant, firm and durable, and will not cause any wear to the material during use.
4. Electrical components such as AC contactors, intermediate relays, and time relays all use professional brand components to ensure long-term stable production.
5. The main shaft adopts reinforced type, adopts 45# seamless tube, and after quenching and tempering treatment, it will not deform under long-term load.
6. Simple electrical box control, easy to operate the machine.
7. The heavy-duty material rack has a large bearing capacity, easy feeding, and stable operation. The opening and stopping of the material rack are automatically controlled by the induction rack, without manual supervision, and the degree of automation is high. It greatly improves the efficiency of the stamping production line and the quality of stamping products and is an ideal unwinding and uncoiling equipment for stamping production lines.
8. The feet are made of international H-beams, with rounded corners, which makes the whole machine more load-bearing and more stable.
9. It is suitable for the delivery of various coil materials, both sheet metal and non-metal materials.
10. The maximum load and maximum material width can be customized
11. Imported electromagnetic contactors and electronic components are used, with fewer failures and long service life.
12. The tension of the braking device can be adjusted, and the main shaft adopts a reinforced type to make the material roll rotate more smoothly and increase its load force.
13. Welded by high-quality steel plates, the overall body has good strength and adopts long-distance bearing support points.
Model | ME-200 | ME-300 |
Stock widthl (mm ) | 200 | 300 |
Stock Thickness (mm ) | 0.35-1.6 | 0.35-1.6 |
Extent Expansion(mm) | Φ450-Φ530 | Φ450-Φ530 |
Material O.D(mm) | Φ1200 | Φ1200 |
Max. Load(KG) | 1000×2 | 2000×2 |
Weight(KG) | 400 | 500 |
1. Strong water resit bottom in plywood.
2. Corner protect by foam and fixed by a protective film.
3. All covered by a strong and hard protective film.
4. Inside steel frame protector.
5. Plywood packing and steel strip outside fixed the box.
6. Finishing packing by normal container or frame container.
1. Equipment model selection, provide the technical parameters of the relevant equipment.
2. Progressing Solution Design: According to the customer’s product processing requirement, we can design a unique solution that supports higher manufacturing efficiency and better processing quality for the customer.
3. Customized Machine Design: According to the customer’s application, we may revise our machine according to the customer’s convenience and high production efficiency.
1. As a professional Automation machine manufacturer and supplier, RUIHUI will supply all machines with training video and user’s manual in English for installation, operation, maintenance, and troubleshooting, and shall give technical guides by remote, such as TeamViewer, E-mail, Telephone, Mobile, Whatsapp, Skype, 24/7 online chat, and so on, when you meet some problems of installation, operation or adjusting.
2. You can come to our factory for training. We will offer professional guidance and direct and effective face-to-face training. Here we have assembled equipment, all sorts of tools, and a testing facility. Training Time: 3~5 days.
3. Our engineer will do a door-to-door instruction training service at your local site. We need your help to deal with the visa formality, prepaid traveling expenses, and accommodation to us during the business trip and service period before their dispatch.
As a top Automation Machine brand in the world, RUIHUI promise:
1. 1 year for the whole Ruihui machine free warranty.
2. Long life-time maintenance, the after-sale department will offer 24/7 English online support.
3. We provide machine-related parts service
4. After the warranty period expired, the Ruihui buyer only needs to pay the actual maintenance cost.
5. Certificate support:
All the machines can be shipped worldwide by sea, air, or express logistics via DHL, FedEx, and UPS. You are welcome to get a free quotation by filling up the form with your name, email, detailed address, product, and requirements, we will shortly contact you with the full information including the most suitable delivery method (fast, secure, discreet) and freight.
ruihui2000@ruihui.cn
+86-0769-89296726
Double Uncoiler Machine Model: MEW Category: Decoiler Brand:Ruihui Material width(mm): 200 Material thickncss(mm): 0.2-3.0 Material O.D: Φ1200 Supply Ability: 20 set / Month In Stock! Payment Terms: T/T
RFU Pallet Horizontal Uncoiler Model: RFU Category: Decoiler Brand:RuiHui Material width(mm): 200 Material thickness(mm): 0.5-1.0 Material I.D: MA × 1000 Supply Ability: 20 sets / Month In Stock!
