With the expansion of the demand for intelligent automation in the machinery manufacturing industry, today, the decoiler straightener feeder continues to develop towards high-end and large-scale trends.
The decoiler straightener feeder can be divided into three types: standard, medium, and thick plates according to the thickness of the application materials.
The decoiler straightener feeder is composed of three functional components: uncoiling, leveling, feeding and servo control system. At the same time, other auxiliary devices will be added according to the actual stamping production needs, such as hydraulic feeding trolley, material rack hydraulic expansion system, press Material arm, pneumatic stopper arm, leveling and feeding pressure head device, electronically controlled lifting system, automatic oil feeder, etc. In order to ensure its long-term trouble-free operation, it is inseparable from perfect maintenance and maintenance.
The decoiler straightener feeder oil pressure system is mainly used for the oil pressure expansion of the material rack and provides power for the hydraulic pressure arm and the loading trolley. The oil pressure system of the decoiler straightener feeder mainly includes hydraulic components and circuits. The specific composition is as follows:
1. Hydraulic components: the basic components that make up the hydraulic system; including oil tanks, hydraulic oil, hydraulic pumps, control valves, hydraulic cylinders, hydraulic motors, and other auxiliary components, which are called hydraulic components.
2. Oil pressure circuit: It is composed of main components such as an oil pressure pump, control valve, and oil pressure cylinder, as well as an oil tank, filter, accumulator, and various accessories. The oil circuit system that performs work by energy conversion is called It is a hydraulic circuit, including two categories: basic circuit and application circuit.
3. Hydraulic system: a working system composed of hydraulic components and circuits.
Maintenance and maintenance of fuel tanks
1. Confirm the oil level gauge to keep the oil level within the upper and lower limits.
2. Use an oil thermometer to check whether the oil temperature in the oil tank is within an appropriate range. The high oil temperature near the pump’s suction port should not be higher than 55℃.
3. Pump the oil every 2-3 months, check the contamination of the oil, and replace it if necessary
4. The bottom of the fuel tank should be drained regularly.
5. When replacing the oil, be sure to clean the inside of the fuel tank and the filter of the fuel tank first.
Maintenance and maintenance of the hydraulic cylinder of the three-in-one feeding hydraulic system
1. Pay attention to whether the center line of the hydraulic cylinder is aligned with the center of the actuating element.
2. Be careful not to block the rod with foreign objects.
