Model: SNL
Category: Straightener
Brand: RuiHui
Material width(mm): 100-300
Material Thickness(mm): 0.1-0.6
Speed(m/min): 6-22
Supply Ability: 20 set / Month In Stock!
Payment Terms: T/T
It is especially suitable to match with the decoiler, gear feeder, and high-speed punching machine to form a high-speed synchronous stamping line for the motor stator and EI piece.
SNL thin plate precision leveling machine is a modified model. It adopts the top 9 and bottom 10 leveling structure. The diameter of the leveling wheel is Ф20mm, mainly for materials of 0.1-0.6mm. The adjustment method of this model has handled adjustment, the dial indicator shows, and the leveling accuracy can reach 0.01mm. It is suitable for metal sheets such as stainless steel, copper sheet, or brass sheet.
Two-stage leveling, there is no need to adjust the leveling in the middle of the coil leveling process (head-end —— tail end), which can ensure the same flatness.
It is impossible to produce good punching parts without leveling and stress relief. Only by leveling the coil material and eliminating stress can this be achieved.
After machine leveling, the material can be corrected to be bent down or flat.
The transmission device is controlled by the frequency converter (cycle control), which can be synchronized with the speed of the punching machine, and the material can be fed smoothly.
Can be used with any feeder.
1. High-precision, high-speed, special-structure sheet material leveling machine.
2. This machine is a powerful new type of equipment for high-speed stamping work, which can improve the quality and quantity of products.
3. It is impossible to produce good stamping parts with uneven coils to relieve stress. This can only be achieved if the coil is leveled and stress relieved.
4. After the machine is leveled, the material can be corrected to be bent upwards or bent downwards or flattened.
5. The transmission device and the frequency converter (cycle control) can be synchronized with the punching machine, and the feed is balanced
6. In the two-stage leveling process, (head-end and end head), there is no need to adjust the leveling in the middle, and the same flatness can be guaranteed.
7. There are single-stage and double-stage models. The standard is double-stage. The diameter of the roller is ￠20mm (25 leveling rollers are arranged in the upper 3/lower 3+upper 9/lower 10), and the leveling material thickness: is 0.1～0.6mm, mainly used for leveling before punching mobile phone accessories, computer accessories, and digital product accessories.
8. By setting up two groups of leveling components in one leveling mechanism, the material can be leveled intermittently many times, and the number of upper leveling rollers that are actively adjustable in each group of leveling components is gradually increased. Coarse alignment of row spacing, and fine alignment of small row spacing, so as to meet the needs of high-precision leveling.
9. The universal joint synchronous vertical transmission mode is used to replace the transmission of gear teeth, and the leveling effect is good.
10. The roller adjustment adopts the pioneered scoring adjustment method instead of the traditional dial indicator adjustment method, no additional correction is required, the debugging is simpler and more accurate, and the service life is longer.
11. There are inlet and outlet wheel assemblies at the inlet and outlet, which is convenient for feeding and discharging.
12. The leveling roller is made of bearing steel, quenched by high-frequency HR60℃, plated with hard chrome, and then ground, with high hardness, good wear resistance, and long service life.
13. Frequency control and speed control, the material is not easy to shake and deform during the running process, so as to ensure the demand for high-precision leveling.
14. The leveling auxiliary wheel (reinforcing device) is attached to the material with a width of more than 300mm to ensure that it will not be bent and deformed during the production process, thereby improving the flatness quality of the product.
| Model | SNL-100 | SNL-200 | SNL-300 | STL-100 | STL-200 | STL-300 |
| Max Material Width(mm) | 100 | 200 | 300 | 100 | 200 | 300 |
| Material Thickness(mm) | 0.1～0.6 | |||||
| Speed(M/Min) | 6～22 | |||||
| Motor (HP) | 1/2 | 1 | 1/2 | 1 | ||
| Inverter | Provided | |||||
| Work Rolls | Upper 9 Lower 10 | |||||
| Pinch Rolls | Upper Lower | Upper 3 Lower 3 | ||||
| Back Up Rolls | N/A | |||||
| Adjustment | Quatre independent type | |||||
| Loop Control | Touch Sensor | |||||
| Work Roll Opening | Manual Operation | |||||
| Drive Method | All Rolls are Driven with Side Gear | |||||
1. Strong water resit bottom in plywood.
2. Corner protect by foam and fixed by a protective film.
3. All covered by a strong and hard protective film.
4. Inside steel frame protector.
5. Plywood packing and steel strip outside fixed the box.
6. Finishing packing by normal container or frame container.
1. Equipment model selection, provide the technical parameters of the relevant equipment.
2. Progressing Solution Design: According to the customer’s product processing requirement, we can design a unique solution that supports higher manufacturing efficiency and better processing quality for the customer.
3. Customized Machine Design: According to the customer’s application, we may revise our machine according to the customer’s convenience and high production efficiency.
1. As a professional Automation machine manufacturer and supplier, RUIHUI will supply the all machine with training video and user’s manual in English for installation, operation, maintenance, and trouble-shooting, and shall give technical guides by remote, such as TeamViewer, E-mail, Telephone, Mobile, Whatsapp, Skype, 24/7 online chat, and so on, when you meet some problems of installation, operation or adjusting.
2. You can come to our factory for training. We will offer professional guidance and direct and effective face-to-face training. Here we have assembled equipment, all sorts of tools, and a testing facility. Training Time: 3~5 days.
3. Our engineer will do a door-to-door instruction training service at your local site. We need your help to deal with the visa formality, prepaid traveling expenses, and accommodation to us during the business trip and service period before their dispatch.
As a top Automation Machine brand in the world, RUIHUI promise:
1. 1 year for the whole Ruihui machine free warranty.
2. Long life-time maintenance, the after-sale department will offer 24/7 English online support.
3. We provide machine-related parts service
4. After the warranty period expired, the Ruihui buyer only needs to pay the actual maintenance cost.
5. Certificate support:
All the machines can be shipped worldwide by sea, air, or express logistics via DHL, FedEx, and UPS. You are welcome to get a free quotation by filling up the form with your name, email, detailed address, product, and requirements, we will shortly contact you with the full information including the most suitable delivery method (fast, secure, discreet) and freight.
RLF Precision Straightener Model: RLF Category: Straightener Brand: RuiHui Material width(mm): 20-300 Material Thickness(mm): 0.1-1.4 Line Speed(m/min): 16-24 Supply Ability: 20 set / Month In Stock! Payment
RLV Precision Straightener Model: RLV Category: Feeder Brand: RuiHui Material width(mm): 150-400 Material Thickness(mm): 0.5-3.0 Speed(m/min): 6-22 Supply Ability: 20 set / Month In Stock! Payment Terms: T/T
RLV-F Precision Straightener Model: RLV-F Category: Straightener Brand: RuiHui Material width(mm): 150-600 Material Thickness(mm): 0.1-1.5 Speed(m/min): 6-22 Supply Ability: 20 set / Month In Stock! Payment Terms:
SFS High-Speed Precision Straightener Model: SFS Category: Straightener Brand: RuiHui Material width(mm): 200-300 Material Thickness(mm): 0.35-1.6 Speed(m/min): 40 Supply Ability: 20 set / Month In Stock! Payment
