[gtranslate]

Every parts’ role of 3 IN 1 Strainghtener feeder

3 in 1 strainghtener feeder is a special machine which combined decoiler, strainghtener and feeder three parts into 1. This kind of machine can save a lot space in your factory at the same time the operation can become easier compared to buy these products seperately. Besides, according to your different sheet material, width, thickness and so many other paremeters, we can provide different kind of machine for you such as the MAC-1,MAC-2,MAC-3 and so on.

You can search the specific infomation in bleow website: https://ruihuimachine.com/category/press-feeder-line

Trolley

The trolley is the first part of the whole line. It is mainly responsible for transporting the coil to the decoiler and can prepare the material during operation. When the coil is almost used up, it can quickly load the material to improve the working efficiency of the whole line.

Operation process: Use the overhead crane to place the coil on the trolley——drive the trolley forward to the appropriate position (hydraulic)——lift the lifting platform to send the coil to the appropriate height (centering by human eyes)——drive the trolley forward again to enter the spindle——and the spindle expands to clamp the coil

Decoiler

The second part of 3in1 is the decoiler. After the process of loading material, the coil has been fixed on the mandrel so now the decoiler will work. Firstly, the pressure arm will driven by the hydraulic cylinder to press the coil to avoid the coil dispersing.There is a wheel on the pressure arm, sometime it will driven by the motor to ensure the same speed with the decoiler. After that the limit roller will move ture right or left to clamp the coil. When everything is ready the decoiler will start to rotate, so the coil will move into the strainghtener feeder.


Strainghtener Feeder

The coil can enter the strainghtener feeder through the

entrance guide wheel. After passing through the leveling

machine, the yield stress of the coil will be eliminated

and the coil will become flat.The two feeding wheels at

the back are driven by the servo system, which can

achieve accurate speed and step feeding. The oiler

and shearing machine can be selected according to

your own needs, and the support device can also be

customized according to the width and weight of the

material and the distance between the equipment and the press.


Conveyor

When the coil is punched into finished products in the press, the finished products are

transferred to the workbench through the conveyor belt,and people

pick up and stack them at the end.

This is the entire working process of the 3 in 1 and the role of each part. Obviously, the entire process can be automated, and humans only need to pick up the materials at the last part. This greatly reduces human resources and can also improve production efficiency and safety index.This type of machine has been widely used in the stamping of small and medium-sized automotive parts and small hardware parts, and is a major contributor to the mass production of automotive parts.

Contact Us

sales@ruihui.cn

+86-769-89296726

Contact Us
GUANGDONG RUIHUI INTELLIGENT TECHNOLOGY CO., LTD.
Phone: +86-769-89296726
Email:sales@ruihui.cn
No.30, South Outer Ring Road, Xiegang Town, Dongguan, P.R.China
MON-SAT 08:00 - 17:50
Related