As a new type of high-precision and high-stability feeding equipment, the appearance of NC servo feeder is not accidental, but has its inevitable reasons.
1. Due to the improvement of the precision requirements of automation equipment in the stamping industry, traditional feeding equipment such as roller feeders and air feeders can no longer fully meet the feeding requirements of stamping production, so the manufacturer developed and produced NC servo feeding on the basis of traditional feeders. machine;
2. The NC servo feeder itself has advantages that other feeding equipment cannot achieve. Based on these obvious advantages, the NC servo feeder has been widely favored by customers as soon as it appeared, and gradually replaced the roller feeder and became the mainstream. Feeding equipment, together with processing equipment such as punches, shears, hydraulic presses, etc., are widely used in many fields of manufacturing industries such as automobiles, hardware, electronics, and computers.
As a professional feeder manufacturer, Ruihui Intelligent Automation summarizes the advantages of NC servo feeders, which are mainly reflected in five aspects:
1. The quality is reliable and the NC servo feeder has high precision. It is a model that integrates the numerical control system into the feeding equipment and realizes the precise control of the feeding roller by PLC and servo motor to realize stamping feeding. Usually, the feeding accuracy can reach ±0.02mm. It is far beyond the reach of other feeding equipment;
2. The scope of application is wider. The NC servo feeder is driven by a vertical motor, and has two modes of mechanical relaxation and pneumatic relaxation, so that it is not limited by the installation equipment. It can be used not only with punches, but also with shearing machines. , the use of hydraulic press, the scope of application is wider;
3. The operation is simple and the degree of automation is high. The NC servo feeder adopts a 7-inch touch screen point-controlled operation mode, and parameters such as feeding step distance and feeding speed can be set simply and quickly. At the same time, it is equipped with a handle for punching mold test, which greatly reduces the Commissioning time during stamping production;
4. Multi-stage feeding to meet the needs of special processing. When using multi-engineering progressive die for stamping production, the feeding step is often not completely consistent. At this time, ordinary feeders cannot be used together, and NC servo The feeder is equipped with a 10-stage feeding function, which can fully meet the needs of customers for multi-station molds;
5. Energy saving and high reliability. During the relaxation stage of the NC servo feeder, the servo motor does not need to continuously run and store energy, which greatly reduces the energy consumption. At the same time, it has an automatic diagnosis function in the event of a fault, which is safe and reliable to use. .
As an early domestic manufacturer of NC servo feeders, Ruihui Zhihua has developed and manufactured a pneumatic-mechanical integrated NC servo feeder on the basis of mechanical NC and pneumatic NC to meet the needs of the market, combining the advantages of the two models. Completely integrated into one, it has become a kind of feeding equipment with wide applicability at present.
